✨ A warm breath of welcome, already waiting where you walk 👣
A bar-type motion sensor lamp that answers to your steps. Magnetic, wire-free — and always the first to know you're home.
Does the cold, dark air feel especially unwelcoming when you open your front door?
The fairies wondered how to greet your footsteps more warmly—
so they tucked a little "breath of welcome" along your path.
The moment you draw near, a soft light wakes —
as if whispering "welcome back" before you've had a chance to reach for a switch.
And when you've passed,
the light follows quietly behind you and drifts back to sleep —
only as long as needed, only for that moment.
It carries this same instinct into the daylight, too.
When the room is already bright enough, it simply closes its eyes and rests —
saving itself for the moments you actually need it.
What they hid along your way:
👣 Knows when you're coming — the motion sensor wakes the light before your hand ever finds a switch
🌙 Two levels of welcome — softer for late-night wandering, brighter for when the dark needs a little more undoing
🧲 Stays where you put it — magnetic mount, no drilling, no wiring; just press the plate and it's home
🌿 Always there first — every tired walk home, every 3am trip down the hall for water, every last set of steps before the lights go out
Where it belongs:
- Hallway. Staircase. The corridor between the bedroom and the kitchen. In a dark closet
- Anywhere your hand reaches for a switch in the dark — and finds nothing.
- Especially at 3am, when the path feels longer than it should and you'd rather not wake the whole room to walk it.
🧚 Fairy's Note: Even on the way to get a glass of water at midnight — it already knows you're coming. It sees you before you see it. 👣
That small flicker of recognition is yours, every time. Find it a wall tonight — press the plate, set the sensor, and let it wait for you.
How it works
🌙 Warm, directional light
2700K warm white — 100 Lux on low for gentle night-moving, 270 Lux on high for a little more reach.
🔘 Side switch guide
| Mode |
What it does |
| ∞ |
Always-on — stays lit until you turn it off |
| O |
Off |
| Ⅰ |
Sensor mode — low brightness |
| Ⅱ |
Sensor mode — high brightness |
| 10" / 30" |
Sensor timer — light stays on for 10 or 30 seconds after detecting movement |
📡 Motion sensor
Activates only in dark environments — when the room is already bright, it closes its eyes and rests.
Detects movement up to 5m away, with a wide 120° sweep for the first 3m and a focused 80° range from 3–5m.
🔋 Battery life
On low brightness: up to 50 hours. On high: up to 4.5 hours.
In sensor mode, the lamp only lights when it detects you — so real-world battery life stretches much further than the numbers suggest.
⚡ Charging
Type-C cable, full charge in about 3 hours.
The indicator glows orange while charging and switches to green when done.
Use a 5V/1A adapter only — fast chargers aren't supported.
Product Details
- Material: Silicone, ABS, HIPS
- Includes: Type-C charging cable × 1, Magnetic mounting plate × 1
- Size: 19.9 × 6.4 × 3.7 cm (7.8 × 2.5 × 1.5 in)
- Motion sensor: Up to 5m / 120° (0–3m) · 80° (3–5m) / dark-environment activation
- USB-C rechargeable (5V/1A only)
- Battery: 1200mAh / Full charge approx. 3 hours
- 2 brightness levels / Sensor timer: 10 or 30 sec auto-off
Care Information
- Wipe the lamp body clean with a dry or soft cloth. Keep the sensor area free of dust — a light wipe now and then keeps it reading the room accurately.
- Charge with a Type-C cable and 5V/1A adapter only; avoid overcharging. The indicator glows orange while charging and turns green when fully charged.
- Keep away from direct sunlight and humid environments to prevent discoloration over time.
- This lamp arrives in an eco-conscious paper box — part of a quiet effort to leave the night a little cleaner than we found it.
Please Note
- This lamp is designed to activate only in dark environments — when the room is already bright, it closes its eyes and rests quietly.
- This is intentional, not a fault. For mounting, it holds best on smooth surfaces like furniture panels, painted walls, or tiled surfaces. If attaching to wallpaper, test a small area first — the adhesive plate may lift the surface when removed.
- This lamp is designed for gentle, path-guiding light — warm and soft, not sharp. It won't replace a reading lamp, but for the dark stretches between rooms, it's exactly enough.
- Color may vary depending on lighting, angle, or your screen.
